SLIC card built as Service Module with type = SLIC the DSM / EPAP connections are not coming up. (Doc ID 2459567.1)

Last updated on NOVEMBER 16, 2023

Applies to:

Goal

I am running STP release 46.5.1.0.0-70.45.1 which has EPAP running. I replaced a SM4G card with SLIC card, and executed the following steps below. (As in a MOP Oracle delivered)

inh-card
chg-card:loc=1207:type=slic
init-flash:loc=1207:code=appr:gpl=BLSLC32
act-flash:Loc=1207
alw-card:Loc=1207

But the card is not available with SST "MPS Unavl", below is the status of the card and the MPS...please let me know if there is any steps missing.

> rept-stat-card:loc=1207:mode=full

  tklcstp 18-10-03 10:22:34 CST EAGLE 46.5.1.0.0-70.45.1
  rept-stat-card:loc=1207:mode=full
  Command entered at terminal #17.
;

Command Accepted - Processing
  tklcstp 18-10-03 10:22:34 CST EAGLE 46.5.1.0.0-70.45.1
  CARD VERSION TYPE GPL PST SST AST
  1207 140-042-000 SLIC SCCPHC IS-ANR MPS Unavl -----
  ALARM STATUS = No Alarms.
  BLSLC32 GPL version = 140-045-000
  IMT BUS A = Conn
  IMT BUS B = Conn
  

rept-stat-mps

  tklcstp 18-10-03 10:38:42 CST EAGLE 46.5.1.0.0-70.45.1
  rept-stat-mps
  Command entered at terminal #17.
;

Command Accepted - Processing
  tklcstp 18-10-03 10:38:42 CST EAGLE 46.5.1.0.0-70.45.1
  VERSION PST SST AST
  EPAP A 016-001-000 IS-NR Active -----
  CRITICAL PLATFORM ALARM DATA = No Alarms
  MAJOR PLATFORM ALARM DATA = No Alarms
  MINOR PLATFORM ALARM DATA = No Alarms
  CRITICAL APPLICATION ALARM DATA = No Alarms
  MAJOR APPLICATION ALARM DATA = No Alarms
  MINOR APPLICATION ALARM DATA = No Alarms
  ALARM STATUS = No Alarms.

  VERSION PST SST AST
  EPAP B 016-001-000 IS-NR Standby -----
 

Solution

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.