SL8500 - No Cartridge In Robot Hand. (Doc ID 2827113.1)

Last updated on DECEMBER 23, 2021

Applies to:

Symptoms

Bot(1.1.0.1.0)

1309 - (2X)
	 No cartridge in robot hand,  hliLsm=0

		VOLSERS seen in 1309 messages: 604503L5 (x1) ME3091L6 (x1)
		(Errors Started - 2021-12-06 20:49:07	 Errors Stopped - 2021-12-07 02:53:28)

1319 - (5X)
	 Robot operation failed Code: 514 - Robot needs to be reset, servo mech track event 5070   hliLsm=0 address = Column(1,1,23,2,0)
	Robot operation failed Code: 514 - Robot needs to be reset, servo mech s-track event 5070   hliLsm=0 address = Column(1,1,-10,2,0)
	Robot operation failed Code: 514 - Robot needs to be reset, cmo_user_put: Retry Performed 5611; cmo_calibrate failed to find target for address (LRCSR) 1,1,-2,1,1 after 1 attempts, cmo_status=5; servo mech track event 5070   hliLsm=0 address = Column(1,1,-9,1,0)
	Robot operation failed Code: 514 - Robot needs to be reset, servo mech s-track event 5070   hliLsm=0 address = Column(1,1,23,2,0)

		VOLSERS seen in 1319 messages: 401665L5 (x1) 901574L5 (x1) B00787L5 (x2) ME3091L6 (x1)

	Errors fall between the mils range of: 141617 - 303452
		(Errors Started - 2021-12-06 20:47:21	 Errors Stopped - 2021-12-07 18:35:24)

3204 - (4X)
	 System error - Device busy reset type=robot
		(Errors Started - 2021-12-06 20:48:58	 Errors Stopped - 2021-12-07 05:07:49)

3287 - (1X)
	 Device transitioned to not ready, address=(Bot)1,1,0,1,0
		(Errors Started - 2021-12-07 18:46:50	 Errors Stopped - 2021-12-07 18:46:50)

Cause

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.