SL150 - How to Configure the Network Configuration on a Tape Drive Installed in a SL150 Tape Library Using the SL150 Web BUI
(Doc ID 2940973.1)
Last updated on APRIL 07, 2023
Applies to:
StorageTek SL150 Modular Tape Library - Version All Versions to All Versions [Release All Releases]Information in this document applies to any platform.
Goal
SL150 - How to Configure the Network Configuration on a Tape Drive Installed in a SL150 Tape Library Using the SL150 Web BUI
With SL150 4.02 and higher firmware a customer can now configure the IP address on their HP and IBM LTO tape drives that are installed in their SL150 tape library.
A SL150 running 4.02 or higher firmware will also remember the Network configuration of the tape drives. So then if a customer has to replace a tape drive the new tape drive will automatically have its Network configuration updated to match the old drive.
Note: The Network configuration of a new replacement tape drive will only be automatically configured if the drive is installed into the same drive bay that the bad drive was removed from.
Solution
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Goal |
| Solution |