[Exadata]EM Target 13c Type13c Change Cisco Switch Settings (Doc ID 2676166.1)

Last updated on AUGUST 22, 2023

Applies to:

Symptoms

 EMCC target type is changed from 12c type to 13c type, some SNMP related settings of Cisco switch are changed by EMCC automatically.

[Before]

　access-list 1 permit <IP ADDRESS 1>
　access-list 1 permit <IP ADDRESS 2>

　snmp-server community ndbsystem RO 1
　snmp-server enable traps envmon fan shutdown supply temperature status
　snmp-server host <IP ADDRESS 1> ndbsystem udp-port <PORT>
　snmp-server host <IP ADDRESS 2> ndbsystem udp-port <PORT>
　snmp-server host <IP ADDRESS 3> ndbsystem

[After]

　access-list 1 permit <IP ADDRESS 1>
　access-list 1 permit <IP ADDRESS 2>

　snmp-server group emgroup v2c
　snmp-server community ndbsystem RO
　snmp-server trap link ietf
　snmp-server trap link switchover
　snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
　snmp-server enable traps entity
　snmp-server enable traps envmon fan shutdown supply temperature status
　snmp-server enable traps config
　snmp-server host <IP ADDRESS 1> version 2c ndbsystem udp-port <PORT> entity envmon config snmp
　snmp-server host <IP ADDRESS 2> version 2c ndbsystem udp-port <PORT> entity envmon config snmp
　snmp-server host <IP ADDRESS 3> ndbsystem

Changes

 Update Cisco Target from 12c type to 13c type.

Cause

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.