E1: 31B: Duplicate QA Test Result Missing when Receiving Multiple RECTRANS Operation (P31B94) with More than One Virtual Vessel (Doc ID 3058350.1)

Last updated on NOVEMBER 08, 2024

Applies to:

Symptoms

When doing multiple transferring (TRANS) operations from one tank, for example to 2 virtual vessels (BOL's) that have Multiple and some Duplicate QA Test Result attached,the QA Test Result on the receiving operation for the second RECTRANS movement operation are missing.

Steps to duplicate:

1. Have a Tank with multiple test with some duplicate tests on it
2. Do a transfer Operation (TRANS) for half the volume from W10 to W35 (P31B94)
3. Check test results after lot
4. Do the second transfer Operation (TRANS) for the remaining volume from W10 to W35
5. At this point, you have 2 BOL's (Virtual lots) with QA Test Results
6. Receive (RECTRANS) 1/2 BOL's to Destination W35
7. Check the After Lot QA Test Results.  (All Test are there)
8. Now,  receive (RECTRANS) for the Second BOL (remaining volume)
       (This is where the QA Results disappear)
9. Review the Before Lot QA Test Results (Everything is fine)
10. However, if you review the After Lot QA Test Results,  some of the QA Results have disappeared.

It appears that if their are any duplicate or the same test twice that they are being lost

Changes

Cause

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.