ODA : Oakcli show version does not show supported version Up-to-date
(Doc ID 1574208.1)
Last updated on JANUARY 07, 2024
Applies to:
Oracle Database Appliance Software - Version 2.1.0.1 and laterOracle Database Appliance - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.
Goal
There are some situations when infrastructure is not upgrade or at latest version of the patch bundle, in this situation "Supported Version" for some component does not show "Up-to-date" .
This situation might occure in following 3 cases.
CASE 1 :
oakcli update -patch <patch_bundle_version> --infra fails during the upgrade.
e.g.
Syntax for version 2.4.0.0
./oakcli update -patch 2.4.0.0.0 --infra
CASE 2 :
Hardware change for which latest Firmware is not applied.
e.g. In this example disk c2d20 is replaced and Firmware in not up-to-date.
oakcli show version -detail
Reading the metadata. It takes a while...
System Version Component Name Installed Version Supported Version
-------------- --------------- ------------------ -----------------
2.4.0.0.0
Controller 11.05.02.00 Up-to-date
Expander 0342 Up-to-date
SSD_SHARED {
[ c2d21,c2d22,c2d23 E125 Up-to-date
]
[ c2d20 ] E12B E125
}
HDD_LOCAL 5G08 Up-to-date
HDD_SHARED A6C0 Up-to-date
ILOM .0.16.22.a r75629 Up-to-date
BIOS 12010310 Up-to-date
IPMI 1.8.10.5 Up-to-date
HMP 2.2.4 Up-to-date
OAK 2.4.0.0.0 Up-to-date
OEL 5.8 Up-to-date
TFA 2.4 Up-to-date
Reading the metadata. It takes a while...
System Version Component Name Installed Version Supported Version
-------------- --------------- ------------------ -----------------
2.4.0.0.0
Controller 11.05.02.00 Up-to-date
Expander 0342 Up-to-date
SSD_SHARED {
[ c2d21,c2d22,c2d23 E125 Up-to-date
]
[ c2d20 ] E12B E125
}
HDD_LOCAL 5G08 Up-to-date
HDD_SHARED A6C0 Up-to-date
ILOM .0.16.22.a r75629 Up-to-date
BIOS 12010310 Up-to-date
IPMI 1.8.10.5 Up-to-date
HMP 2.2.4 Up-to-date
OAK 2.4.0.0.0 Up-to-date
OEL 5.8 Up-to-date
TFA 2.4 Up-to-date
CASE 3 :
This situation can occure for the GI_Home and DB_Home as well if update command is not run or it is failed.
Solution
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
Goal |
CASE 1 : |
oakcli update -patch <patch_bundle_version> --infra fails during the upgrade. |
CASE 2 : |
Hardware change for which latest Firmware is not applied. |
CASE 3 : |
This situation can occure for the GI_Home and DB_Home as well if update command is not run or it is failed. |
Solution |
CASE 1 : |
Case 2: |
Case 3: |
References |