Hardware And Firmware Mismatch After Exadata Storage Server (ESS) upgrade
(Doc ID 2817503.1)
Last updated on DECEMBER 02, 2022
Applies to:
Oracle Exadata Storage Server Software - Version 20.1.0.0.0 and laterOracle Exadata Hardware - Version 11.2.3.1.1 and later
Information in this document applies to any platform.
Symptoms
Hardware and Firmware does not match after applying QFSDP.
[root@db01 ~]# /opt/oracle.cellos/CheckHWnFWProfile
[WARNING] The hardware and firmware does not match with the profile. See details below
<Check_Result Server_Model="ORACLE_SERVER_X8-2">
<Check_Result_for_HardDisk>
<HardDisk SIGNATURE="ST1200IN9SUN1.2T" SLOT="252:0">
<DiskFirmwareVersion FIRMWARE_ID="252:0" SUSPEND_UPDATE="No" COMPARE_TYPE="Common">
<Required VALUE="ORAB"/>
<Found VALUE="ORA9"/>
</DiskFirmwareVersion>
</HardDisk>
</Check_Result_for_HardDisk>
</Check_Result>
[WARNING] The hardware and firmware does not match with the profile. See details below
<Check_Result Server_Model="ORACLE_SERVER_X8-2">
<Check_Result_for_HardDisk>
<HardDisk SIGNATURE="ST1200IN9SUN1.2T" SLOT="252:0">
<DiskFirmwareVersion FIRMWARE_ID="252:0" SUSPEND_UPDATE="No" COMPARE_TYPE="Common">
<Required VALUE="ORAB"/>
<Found VALUE="ORA9"/>
</DiskFirmwareVersion>
</HardDisk>
</Check_Result_for_HardDisk>
</Check_Result>
Changes
QFSDP was applied on the Exadata server .
This error could be raised if any failed disk is replaced with disk having old firmware.
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Symptoms |
| Changes |
| Cause |
| Solution |
| References |