My Oracle Support Banner

Sun Fire[TM] v1280/E2900 and Netra[TM] 1280/1290 server: How to flash firmware with lom -G [Video] (Doc ID 1003856.1)

Last updated on FEBRUARY 03, 2019

Applies to:

Sun Netra 1280 Server - Version All Versions and later
Sun Netra 1290 Server - Version All Versions and later
Sun Fire V1280 Server - Version All Versions and later
Sun Fire E2900 Server - Version All Versions and later
All Platforms

Goal

Description

Updating firmware using the lom -G command.

In order to flash or update the firmware on the Sun Fire[TM] V1280/E2900 or Netra[TM] 1280/1290 servers without using a network connection to the system controller you must use the lom -G command.  This procedure is good to utilize if the system controller does not have a connection to the network or if you cannot put an http server or an ftp server on the network the system controller is on.

Available for this topic, a Video Tutorial; Brief how-to video tutorials that provide step-by-step instructions answering Sun's most frequently asked questions. View the video answer and/or follow the detailed instructions below.


Video - lom -G Update Procedure (5:00)

 

Sunsolve users must download the attachment to view the video.

Solution

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!


My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.