Last updated on SEPTEMBER 20, 2017
Applies to:Sun SPARC Enterprise T5240 Server - Version Not Applicable and later
SPARC T4-2 - Version Not Applicable and later
SPARC T5-2 - Version All Versions and later
SPARC M5-32 - Version All Versions and later
SPARC T3-2 - Version Not Applicable and later
Information in this document applies to any platform.
This document describes how to use the Fault Management Shell on ILOM 3.x and later platforms.
Caution - The purpose of the Oracle ILOM Fault Management Shell is to help Oracle Services personnel diagnose system problems. Customers should not launch this shell or run fault management commands in the shell unless requested to do so by Oracle Services.
The following fault management terms are defined :
|Fault||A detected error condition in the hardware or software. A fault can be logged to the ILOM system event log.|
|FMRI||Fault Management Resource Identifier. This could be either the FRU name or UUID.|
|FRU||Field Replaceable Unit (such as a drive, memory DIMM, or printed circuit board).|
|Proactive Self-Healing||Proactive Self-Healing is an architecture and methodology for automatically diagnosing, reporting, and handling software and hardware fault conditions. This reduces the time required to debug a hardware or software problem and provides the administrator or Oracle support with detailed data about each fault. The architecture consists of an event management protocol, the fault manager, and the fault-handling software.|
|Universal Unique Identifier (UUID)||Used to uniquely identify a problem across any set of systems.|
Note : by using /X to navigate through the ILOM targets, the system will automatically drive you to /SP or to /CMM accordingly. Example from a T3-4 system :
/SP/diag/snapshot : Take snapshot of system for diagnostic purposes
Sign In with your My Oracle Support account
Don't have a My Oracle Support account? Click to get started
My Oracle Support provides customers with access to over a
Million Knowledge Articles and hundreds of Community platforms