Sun Storage J4000 JBOD Array: Troubleshooting Disk Failures
(Doc ID 1353887.1)
Last updated on JULY 15, 2024
Applies to:
Sun Storage J4400 Array - Version Not Applicable and laterSun Storage J4500 Array - Version Not Applicable and later
Sun Storage J4200 Array - Version Not Applicable and later
Information in this document applies to any platform.
Purpose
The purpose of this document is to help troubleshoot disk failure symptoms in Sun Storage J4000 JBOD arrays.
Symptoms may include:
- An amber LED is lit on one or more drives in the array.
- Host connected to the array reports SCSI driver errors for one or more drives.
- One or more drives from the array is not seen by host.
- SAS RAID HBA reports Failed/Degraded status for a volume.
This document mainly deals with the Solaris Operating System Environment. The instructions may vary for other OS environments. This document does not cover J4000 JBOD arrays connected to Sun Storage 7000 Unified Storage Systems, for which refer to Sun Storage 7000 Unified Storage System documentation.
Troubleshooting Steps
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Purpose |
| Troubleshooting Steps |
| References |