Sun Storage 7000 Unified Storage System: How to create VLANs over an aggregated link and assign IP addresses
(Doc ID 1437610.1)
Last updated on OCTOBER 18, 2022
Applies to:
Sun Storage 7310 Unified Storage System - Version Not Applicable to Not Applicable [Release N/A]Sun Storage 7210 Unified Storage System - Version Not Applicable to Not Applicable [Release N/A]
Sun ZFS Storage 7120 - Version Not Applicable to Not Applicable [Release N/A]
Sun Storage 7410 Unified Storage System - Version Not Applicable to Not Applicable [Release N/A]
Sun Storage 7110 Unified Storage System - Version Not Applicable to Not Applicable [Release N/A]
Information in this document applies to any platform.
Goal
Summary
This documents is intended to guide through the steps to set up the following.
- Set up a link aggregation that contains mutiple physical links (No LACP)
- Set up VLANs over an aggregated links
- Set up IP addresses to each datalinks with VLAN ID.
Out of Scope
This document does NOT include:
- Setting up a link aggregation with LACP.
- How to set up VLANs on the Ethernet switch
- Physical cabling
Setup Overview
The blow is the overview of the set up.
| Network Port | Datalink | VLAN (datalink) | IP Address |
|---|---|---|---|
| Network Port 1 | aggr1 | VLAN 10 | <IP1>/24 |
| Network Port 2 | (same as above) | VLAN 20 | <IP2>/24 |
Solution
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Goal |
| Solution |
| 1. Setting Up An Aggregated Link |
| 2. Setting up VLANs over The Aggregated Link |
| 3. Assigning IP addresses to each VLAN datalinks |