Sun Storage 2500-M2 or 6x80 Arrays Reporting "insufficient cache backup capacity" after a controller replacement or firmware upgrade
(Doc ID 1486413.1)
Last updated on MAY 05, 2022
Applies to:
Sun Storage 6780 Array - Version Not Applicable to Not Applicable [Release N/A]Sun Storage 2540-M2 Array - Version Not Applicable to Not Applicable [Release N/A]
Sun Storage 2530-M2 Array - Version Not Applicable to Not Applicable [Release N/A]
Sun Storage 6180 Array - Version Not Applicable to Not Applicable [Release N/A]
Sun Storage 6580 Array - Version Not Applicable to Not Applicable [Release N/A]
Information in this document applies to any platform.
Symptoms
Sun Storage Common Array Manager (CAM) reports the following alarm for your array:
This document covers the following situations:
- The alarm is raised after a controller replacement. Make sure the correct replacement controller was installed. Refer to <Document 1546658.1> Sun Storage 2500 Arrays: Controller Replacement Requires Verifying Cache Size.
- The alarm is raised after a firmware upgrade from 07.77 or lower, to 07.80 or higher.
Changes
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
Symptoms |
Changes |
Cause |
Solution |
References |