Tape - Trying to Backup a T2000 Server to a Tape Drive Over a Network Using ufsdump
(Doc ID 1551084.1)
Last updated on JULY 25, 2022
Applies to:
Sun StorageTek SL24 Tape Autoloader - Version All Versions and laterSun StorageTek SL48 Tape Library - Version All Versions and later
Sun StorageTek L700e Tape Library - Version Not Applicable and later
Sun StorageTek SL500 Modular Library System - Version All Versions and later
Information in this document applies to any platform.
The server sees the sl24 perfectly fine. A backup using OSB was completed this morning for the Host server. The issue is when I try to do a ufsdump remotely to the sl24 through the host server.
-Developed after sl24 has been working and is still working but the ufsdump will not see the device.
-Yes the sl24 is initialized and in a ready state
-The server is an Oracle/SUN M4000 running Solaris 10
Symptoms
Trying to backup a T2000 server to a tape drive over a network using ufsdump.
When running the command to dump, get the following: Do not have anything in /dev/rmt. The SL24 is mounted at /dev/obt0 but it says there is no such device.
ufsdump 0ucf 172.25.206.240:/dev/scsi/changer/c3t500143801403874Fd1 /
DUMP: 172.25.206.240: Connection timed out
DUMP: Cannot connect to tape host `172.25.206.240'
DUMP: The ENTIRE dump is aborted.
ufsdump 0ucf 172.25.206.78:/dev/obt0 /
DUMP: permission denied
DUMP: Cannot connect to tape host `172.25.206.78'
DUMP: The ENTIRE dump is aborted.
==============================================
57 /etc % ufsdump 0ucf 172.25.206.78:/dev/obt0 /
DUMP: Date of this level 0 dump: Tue Apr 23 15:18:59 2013
DUMP: Date of last level 0 dump: the epoch
DUMP: Dumping /dev/rdsk/c0t1d0s0 (lrrpsf:/) to 172.25.206.78:/dev/obt0.
DUMP: Mapping (Pass I) [regular files]
DUMP: Mapping (Pass II) [directories]
DUMP: Writing 63 Kilobyte records
DUMP: Estimated 979826 blocks (478.43MB).
DUMP: Dumping (Pass III) [directories]
DUMP: write: No such device or address
DUMP: Write error 0 blocks into volume 1
DUMP: NEEDS ATTENTION: Do you want to restart?: ("yes" or "no") yes
DUMP: Change Volumes: Mount volume `#1' on `172.25.206.78:/dev/obt0'
DUMP: NEEDS ATTENTION: Is the new volume (#1) mounted on `172.25.206.78:/dev/obt0' and ready to go?: ("yes" or "no") yes
DUMP: Dumping (Pass III) [directories]
DUMP: write: No such device or address
DUMP: Write error 0 blocks into volume 1
DUMP: NEEDS ATTENTION: Do you want to restart?: ("yes" or "no") no
DUMP: The ENTIRE dump is aborted.
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Symptoms |
| Cause |
| Solution |