Sun Storage 2500, 2500-M2, and 6000 Arrays: Solaris Explorer Data Collector Can Trigger write/read Retryable Error On System using Symantec VxDMP
(Doc ID 1614069.1)
Last updated on OCTOBER 05, 2022
Applies to:
Sun Storage 6130 Array - Version All Versions and laterSolaris Operating System - Version 10 10/09 U8 and later
Explorer Data Collector - Version 5.11 to 6.4 [Release 5.0 to 6.0]
Sun Storage 2540-M2 Array - Version Not Applicable and later
Sun Storage 2530-M2 Array - Version Not Applicable and later
Oracle Solaris on x86 (32-bit)
Oracle Solaris on x86-64 (64-bit)
Oracle Solaris on SPARC (64-bit)
Oracle Solaris on SPARC (32-bit)
Symptoms
Running Solaris Explorer Data Collector can trigger following type of error message on Solaris system using Symantec VxDMP instead of Solaris Multipathing (MPxIO):
Please refer to Doc 1006536.1 for a detailed explanation of the error.
Changes
The problem always existed and is reproducible on following configuration:
- Sun Storage array 6100 and 2500 series
- Solaris 10u8 and later
- Solaris Multipathing (MPxIO) disabled
- Symantec VxVM/DMP 5.x and below or 5.1 and later without option dmp_native_multipathing enabled
- Symantec VxDMP using libvxengenio.so library for the STK array
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
Symptoms |
Changes |
Cause |
Solution |
References |