My Oracle Support Banner

Running networksetup-two script for new installation on Oracle Big Data Appliance (BDA) X4-2 fails with "gwp2js:no ports found for leaf1" (Doc ID 1664640.1)

Last updated on FEBRUARY 03, 2020

Applies to:

Big Data Appliance X4-2 Hardware - Version All Versions and later
Linux x86-64

Symptoms

NOTE: In the examples that follow, user details, cluster names, hostnames, directory paths, filenames, etc. represent a fictitious sample (and are used to provide an illustrative example only). Any similarity to actual persons, or entities, living or dead, is purely coincidental and not intended in any manner. 

 While running networksetup-two script for new installation on Oracle Big Data Appliance (BDA) X4-2, the following errors are seen:

[root@bdanode01 network]# ./networksetup-two | tee /tmp/network-conf.out
networksetup-two: analyse /opt/oracle/bda/BdaDeploy.json
networksetup-two: passed
networksetup-two: checking for BdaExpansion.json
networksetup-two: ping server ips on admin network
networksetup-two: passed
networksetup-two: test ssh server ips on admin network
networksetup-two: passed
networksetup-two: run connected network post script on each server
networksetup-two: post network setup for <IP_ADDRESS>
networksetup-two: post network setup for <IP_ADDRESS>
networksetup-two: post network setup for <IP_ADDRESS>
networksetup-two: post network setup for <IP_ADDRESS>
networksetup-two: post network setup for <IP_ADDRESS>
networksetup-two: post network setup for <IP_ADDRESS>
networksetup-two: post network setup for <IP_ADDRESS>
networksetup-two: post network setup for <IP_ADDRESS>
networksetup-two: post network setup for <IP_ADDRESS>
networksetup-two: post network setup for <IP_ADDRESS>
networksetup-two: post network setup for <IP_ADDRESS>
networksetup-two: post network setup for this node
networksetup-two: ping servers by name on admin network
networksetup-two: passed
networksetup-two: verify infiniband topology
networksetup-two: passed
networksetup-two: start setup client network (10gigE over Infiniband)
networksetup-two: ping both gtw leaf switches
networksetup-two: passed
networksetup-two: confirm switches occur in ib fabric
networksetup-two: passed
networksetup-two: verify existence of gateway ports
gwp2js:no ports found for leaf1
gwp2js:input was
root@<IP_ADDRESS>x's password:

INTERNAL PORTS:
---------------

Device Port Portname PeerPort PortGUID LID IBState GWState
---------------------------------------------------------------------------
Bridge-0 1 Bridge-0-1 4 <GUID1> 0x0003 Active Up
Bridge-0 2 Bridge-0-2 3 <GUID2> 0x0005 Active Up
Bridge-1 1 Bridge-1-1 2 <GUID3> 0x0007 Active Up
Bridge-1 2 Bridge-1-2 1 <GUID4> 0x0009 Active Up

CONNECTOR 0A-ETH:
-----------------

Port Bridge Adminstate Link State MTU TxPause RxPause
-------------------------------------------------------------------------
0A-ETH-1 Bridge-0-2 Enabled Down Reset 9600 Global Global
0A-ETH-2 Bridge-0-2 Enabled Down Reset 9600 Global Global
0A-ETH-3 Bridge-0-1 Enabled Down Reset 9600 Global Global
0A-ETH-4 Bridge-0-1 Enabled Down Reset 9600 Global Global

CONNECTOR 1A-ETH:
-----------------

Port Bridge Adminstate Link State MTU TxPause RxPause
-------------------------------------------------------------------------
1A-ETH-1 Bridge-1-2 Enabled Down Reset 9600 Global Global
1A-ETH-2 Bridge-1-2 Enabled Down Reset 9600 Global Global
1A-ETH-3 Bridge-1-1 Enabled Down Reset 9600 Global Global
1A-ETH-4 Bridge-1-1 Enabled Down Reset 9600 Global Global

gwp2js:exit 1

*** gwp2js *** Out of branches near "fail <- generate json for gw ports" called from "parse ports from expect"
*** gwp2js *** Syntax error on line 33:

^(012)

networksetup-two: generation of leaf1gwp.json failed

 

 

Cause

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!


In this Document
Symptoms
Cause
Solution

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.