Fatal Error Reset reported by (PCI-PBM)
(Doc ID 1915266.1)
Last updated on JUNE 23, 2021
Applies to:
Sun Fire 280R Server - Version All Versions and laterInformation in this document applies to any platform.
Symptoms
The system suffers a fatal error reset and a message is reported in the console logs. The messages file doesn't capture the error since this is an HW fatal reset and Solaris is stopped abruptly, and no orderly shutdown is performed. No FMA is involved.
Looking at the console logs in RSC (Remote System Control), the Fatal Error Reset points to the 'PCI-PBM' the PCI-PBM is related to the PCI Bridge chip.
From RSC we get the error below:
NOTE: the RSC should be configured appropriately to send the errors to RSC console.
Please refer to the documents below for RSC configuration:
How to set up and disable the RSC console on Sun Fire[TM] 280R, V480, V490, V880, V890 and V880z servers. (Doc ID 1011888.1)
How To Verify Remote System Controller (RSC) is Configured and Current on Sun Fire[TM] 280R/V480/V490/V880/V890 servers (Doc ID 1011569.1)
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
Symptoms |
Cause |
Solution |
References |