SL500 FC Autochanger and Tape Drives Not Present or Seen After FC HBA Replacement
(Doc ID 1922836.1)
Last updated on OCTOBER 05, 2022
Applies to:
Qlogic FC HBA - Version Not Applicable and laterSun Blade 6000 System - Version Not Applicable and later
Emulex FC HBA - Version Not Applicable and later
Solaris Operating System - Version 8 6/00 U1 and later
Sun StorageTek SL500 Modular Library System - Version Not Applicable and later
Information in this document applies to any platform.
Symptoms
Oracle Linux server had an Oracle FC HBA was configured to access an SL500 FC Autochanger and Tape drives, via FC switch.
Notice. This problem could be observed with other operating systems like Solaris or Windows.
The Oracle FC HBA failed , connection to the FC switch was lost and it was replaced.
After FC HBA replacement, the connectivity to the switch is fine again:
But the FC HBA does not detect / see the SL500 autochanger and/or the tape drives.
The new WWN of the FC HBA has been configured on the FC switch zonning and this is correct.
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Symptoms |
| Cause |
| Solution |
| References |