GM / vbsc.log flooded with "DEBUG: failed to check for data on "ipmi" LDC because it reset"
(Doc ID 1930869.1)
Last updated on JANUARY 23, 2024
Applies to:
SPARC T4-2 - Version All Versions to All Versions [Release All Releases]SPARC T5-4 - Version All Versions and later
SPARC T5-2 - Version All Versions and later
SPARC T5-8 - Version All Versions and later
Information in this document applies to any platform.
Symptoms
In the initial case, the Service Processor firmware was upgraded from v8.5.0a to 8.5.1b using Patch #151296-02. When the Service Processor came back up after reset the Host fails to boot. When downgrading the System Firmware back to v8.5.0a via the web interface, the problem persists. At this time the host system will not start. This can be solved at first power cycling the machine, but this will not provide a definite solution to the problem.
The T5 systems have hit this problem for another reason that may be due to firmware.
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Symptoms |
| Cause |
| Solution |
| References |