My Oracle Support Banner

SL150 - OP Panel Failed With Error 9062 (Doc ID 2201309.1)

Last updated on JUNE 03, 2019

Applies to:

StorageTek SL150 Modular Tape Library - Version All Versions and later
Information in this document applies to any platform.

Symptoms

SPLAT shows no drives nor power supplies instlaled:

Config
2018-06-28 11:49:08

Drive Information

Drive Serial Drive Microcode Partition IP Interface Library Needs Drive Media Prevent Health Last
Id Num Type Version ID Address Type Address Cleaning Errors Errors Media Removal State Cleaned

Drive
Id Port # WWN Node Name WWNPortName PortEnabled SpeedInGb Topology Hard Address

2018-06-28 11:49:08

Current Magazine Information

Slot ID State Needs Audit

Current Power Supplies

ID Present Status

5813, "Director - initResponse() directorSelfInit; directorVerifyMcus: Not all MCU States are Operational; Mci verifyInventory: FAILURE, the KLO is in NO_CONNECTION

65 2018-06-28T11:03:42.018 0.0.0.0.0 3202 ifm
error
0100 5813 "IfmInitThread:Failure to Initialize...reason==The KLO OpPanel MCU is not present - GOING INOP"
64 2018-06-28T11:03:41.996 0.0.0.0.0 3920 robot /usr/local/bin/Ifm
error
0000 5813 "Director - initResponse() directorSelfInit; directorVerifyMcus: Not all MCU States are Operational; Mci verifyInventory: FAILURE, the KLO is in NO_CONNECTION; End of Text"
61 2018-06-28T11:03:41.006 0.0.0.0.0 000 mci-normal
warn
0000 5809 "MciHdwFru::read(string) module 1 index 0:Bad MCU fru status or length exceeded: status=3, length=0"
60 2018-06-28T11:03:40.988 0.0.0.0.0 000 sensor-manager
error
0000 8039 "mainLoop: No robot.ready file, monitoring thread not started! Library InOp."

 

 

Changes

 

Cause

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!


In this Document
Symptoms
Changes
Cause
Solution


My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.