ACSLS not able to see or configure newly added tape drives in a SL3000
(Doc ID 2276377.1)
Last updated on JULY 24, 2024
Applies to:
Sun StorageTek Auto Cartridge Sys Lib SW (ACSLS) - Version 8.0 to 8.4 [Release 8.0]Sun StorageTek SL3000 Modular Library System - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.
Symptoms
Customer installed four new T10KD tape drives in a new SL3000 drive panel.
Customer ran 'config acs 0' in ACSLS and it looks like the new drives were not presented to ACSLS by the LMU.
ACSLS is not able to see nor configure these tape drives even though they can be seen though SLConsole.
When asked to verify the drive details on the SLConsole, the customer said that the new drives did not have any associated HLI address,
as compared to the old drives.
Changes
Customer added a new tape drive panel assembly and four new tape drives to their existing eight tape drives in their SL3000 tape library.
Cause
To view full details, sign in with your My Oracle Support account. |
|
Don't have a My Oracle Support account? Click to get started! |
In this Document
| Symptoms |
| Changes |
| Cause |
| Solution |
| References |