My Oracle Support Banner

FMD-8000-CV Alert (fru-monitor.fru-remove) Appears Upon First HOST Start Following SysFW 9.8.5 Installation (Doc ID 2399553.1)

Last updated on SEPTEMBER 09, 2021

Applies to:

SPARC T7-1 - Version All Versions to All Versions [Release All Releases]
SPARC T7-4 - Version All Versions to All Versions [Release All Releases]
SPARC T7-2 - Version All Versions to All Versions [Release All Releases]
SPARC M7-8 - Version All Versions to All Versions [Release All Releases]
SPARC M7-16 - Version All Versions to All Versions [Release All Releases]
Information in this document applies to any platform.

Symptoms

FMD-8000-CV alerts (fru-monitor.fru-remove) appear upon first HOST start following SysFW 9.8.5 installation.

Check the SysFW version installed:

% prtdiag -v | egrep "Sun System Firmware"
Sun System Firmware 9.8.5.a 2018/03/29 18:19

Solaris FMA will show alert FMD-8000-CV for a removed component similar to the following:

# fmadm list-alert
--------------- ------------------------------------  -------------- ---------
TIME            EVENT-ID                              MSG-ID         SEVERITY
--------------- ------------------------------------  -------------- ---------
Apr 16 21:38:56 f949de20-e85b-47ef-bcb6-cee137ba70d4  FMD-8000-CV    Minor

Problem Status    : open
Diag Engine       : software-diagnosis / 0.1
System
    Manufacturer  : Oracle Corporation
    Name          : SPARC M8-8
    Part_Number   : 35489448+1+1
    Serial_Number : AK00420500
    Host_ID       : 86d10000

----------------------------------------
Suspect 1 of 1 :
   Problem class : alert.oracle.solaris.fmd.fru-monitor.fru-remove
   Certainty   : 100%

   FRU
     Status           : Active/not present
     Location         : "/SYS/CMIOU6/IOH/IOS1/RP0"
     Manufacturer     : unknown
     Name             : unknown
     Part_Number      : unknown
     Revision         : unknown
     Serial_Number    : unknown
     Chassis
        Manufacturer  : Oracle-Corporation
        Name          : SPARC-M8-8
        Part_Number   : 35489448+1+1
        Serial_Number : AK00420500
   Resource
     Status           : Active/not present

Description : FRU '/SYS/CMIOU6/IOH/IOS1/RP0' has been removed from the system.

Response    : FMD topology will be updated.

Impact      : System impact depends on the type of FRU.

Action      : Use 'fmadm faulty' to provide a more detailed view of this event.
              Please refer to the associated reference document at
              http://support.oracle.com/msg/FMD-8000-CV for the latest service
              procedures and policies regarding this diagnosis.

 

Changes

The fix for the issue documented in Doc ID 2391817.1 creates the informational alert.  These are alerts and not fault diagnosis.  FMA alert messages can easily be listed with the command 'fmadm list-alert' to differentiate them from faults ('fmadm list-fault').

The removed locations should include these,

FMA Reported FRU                         Corrected FRU Location
/SYS/CMIOUn/IOH/IOS3/RP0      /SYS/CMIOUn/PCIE1
/SYS/CMIOUn/IOH/IOS0/RP0      /SYS/CMIOUn/PCIE2
/SYS/CMIOUn/IOH/IOS1/RP0      /SYS/CMIOUn/PCIE3

Cause

To view full details, sign in with your My Oracle Support account.

Don't have a My Oracle Support account? Click to get started!

In this Document
Symptoms
Changes
Cause
Solution
References

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.