Unable to find a matching entry for Access-control using "select" option in configuration. (Doc ID 2919173.1)

Last updated on JANUARY 17, 2023

Applies to:

Goal

Customer reported that after implementing access-control, the element isn't selectable again using "select" command!

Example:

----------

access-control
  realm-id core_realm
  description
  source-address xx.xx.xx.xx/yy
  destination-address 0.0.0.0
  application-protocol SIP
  transport-protocol ALL
  access permit
  average-rate-limit 0
  trust-level high
  minimum-reserved-bandwidth 0
  invalid-signal-threshold 0
  maximum-signal-threshold 0
  untrusted-signal-threshold 0
  deny-period 30
  nat-trust-threshold 0
  max-endpoints-per-nat 0
  nat-invalid-message-threshold 0
  cac-failure-threshold 0
  untrust-cac-failure-threshold 0
  last-modified-by admin@xx.xx.xx.xx
  last-modified-date 2022-12-21 11:44:12

hansb103#

hansb103# conf t
hansb103(configure)# ses
hansb103(session-router)# access-control
hansb103(access-control)# sel
: xx.xx.xx.xx/yy
: core_realm
: SIP
no matching entries...
hansb103(access-control)# sel
: xx.xx.xx.xx
: core_realm
: SIP
no matching entries...
hansb103(access-control)#
 

Solution

My Oracle Support provides customers with access to over a million knowledge articles and a vibrant support community of peers and Oracle experts.